Yokogawa Standalone MW100 - Manual (Page 31)

1-24 IM MW100-17E
When Action Occurs on Match Time
Setting SLp1,p2,p3,p4,p5,p6
p1 Box number (01 to 30)
p2 Event type (MATCH_TIME)
p3 Match time number (1 to 3)
p4 Event detection method
EDGE
Edge start
LEVEL Level start
p5 Action types
p6 Flag numbers (F01 to F60)
Query SL[p1]?
Example Set box number 7 to an action in which recording starts
at the time specified for match time 1.
SL07,MATCH_TIME,1,EDGE,MEMORY_START
Explanation The p6 setting is only valid when p5 is FLAG. For the
action types, see section 1.3.
When Action Occurs on USER Key
Setting SLp1,p2,p3,p4,p5,p6
p1 Box number (01 to 30)
p2 Event type (USER_KEY)
p3 Key number (1, 2)
p4 Event detection method
EDGE
Edge start
LEVEL Level start
p5 Action types
p6 Flag numbers (F01 to F60)
Query SL[p1]?
Example Set box number 8 to an action in which the specified file
is saved upon pressing of USER key 1.
SL08,USER_KEY,1,EDGE,FILE_SAVE
Explanation The p6 setting is only valid when p5 is FLAG. For the
action types, see section 1.3.
SI Timer Settings
Setting When p2=OFF
SIp1,p2
When p2=RELATIVE
SIp1,p2,p3,p4
When p2=ABSOLUTE
SIp1,p2,p3,p4
When Not Using the Timer
Setting SIp1,p2
p1 Timer number (1 to 6)
p2 Timer type (OFF)
Query SI[p1]?
Example Set timer number 1 to OFF.
SI1,OFF
When Using the Relative Timer
Setting SIp1,p2,p3,p4
p1 Timer number (1 to 6)
p2 Timer type (RELATIVE)
p3 Time interval-days (0 to 31)
p4 Time interval-time (HH:MM)
HH hours (00 to 23)
MM
Minute (00 to 59)
(However, when p3 is 0, 00:00 cannot
be set.)
Query SI[p1]?
Example Set a relative time of 3 hours and 30 minutes on timer
number 1.
SI1,RELATIVE,0,03:30
When Using the Absolute Timer
Setting SIp1,p2,p3,p4
p1 Timer number (1 to 6)
p2 Timer type (ABSOLUTE)
p3 Time interval
1M/2M/3M/4M/5M/6M/10M/12M/15M/20M/30M
(minutes)
1H/2H/3H/4H/6H/8H/12H/24H (hours)
p4 Reference time (HH:MM)
HH hours (00 to 23)
MM
Minute (00 to 59)
Query SI[p1]?
Example Set a time interval of 30 minutes and a reference time of
17 hours and 15 minutes on timer number 1.
SI1,ABSOLUTE,30M,17:15
SQ Match Time Settings
Setting When p2=OFF
SQp1,p2
When p2=MONTH
SQp1,p2,p3,p4
When p2=WEEK
SQp1,p2,p3,p4
When p2=DAY
SQp1,p2,p3
When Not Using the Match Time
Setting SQp1,p2
p1 Match time number (1 to 3)
p2 Start type (OFF)
Query SQ[p1]?
Example Set match timer number 1 to OFF.
SQ1,OFF
When Starting Match Time in Units of Months
Setting SQp1,p2,p3,p4
p1 Match time number (1 to 3)
p2 Start type (MONTH)
p3 Start date/time-day (1 to 31)
p4 Start date/time-time (HH:MM)
HH hours (00 to 23)
MM
Minute (00 to 59)
Query SQ[p1]?
Example Set match time number 1 to 1 day, 8 hours 30 minutes.
SQ1,MONTH,1,08:30
1.4 Setting Commands (System Related)