Yokogawa Standalone MW100 - Manual (Page 40)

1-33 IM MW100-17E
Commands
1
2
3
App App
Index
YN DNS Client Settings
Setting YNp1,p2,p3,p4
p1 DNS server primary
(0.0.0.0 to 255.255.255.255)
p2 DNS server secondary
(0.0.0.0 to 255.255.255.255)
p3 Domain suffix-primary (up to 63
characters)
p4 Domain suffix-secondary (up to 63
characters)
Query YN?
Example Set the primary and secondary DNS server.
YN192.168.0.1,192.168.0.2
Explanation For the characters that can be used for domain suffixes,
see host and domain name strings in section 1.3.
YH DHCP Client Settings
Setting YHp1,p2
p1 Getting DNS information OFF/ON
p2 Host name registration OFF/ON
Query YH?
Example Get DNS server information and turn ON host name
registration.
YHON,ON
Explanation The settings updated with this command are enabled
when the MW100’s power is turned OFF, then turned
back ON again.
YF FTP Client Settings
Setting YFp1,p2,p3,p4,p5,p6,p7
p1 Connection type
1
Primary server
2 Secondary server
p2 FTP server (up to 64 characters)
p3 Port number (1 to 65535)
p4 User name (up to 32 characters)
p5 Password (up to 32 characters)
p6 Directory (up to 32 characters)
p7 Use passive mode (OFF/ON)
Query YF[p1]?
Example Transfer file to primary server.
YF1,192.168.1.1,21,YOKOGAWA,1234,MW_DATA,
OFF
Explanation • For the characters that can be used for the FTP
server, see host and domain name strings in section
1.3.
• For the characters that can be used for user names
and directories, see user specified characters in
section 1.3.
• For the characters that can be used for passwords,
see password strings in section 1.3.
• The password is output encrypted during a query.
YG FTP Client Operation Settings
Setting YGp1
p1 Transfer time shift (0 to 120)[min]
Query YG?
Example Set to 3 minutes
YG3
YM Mail Client Settings
Setting When p5=OFF
YMp1,p2,p3,p4,p5
When p5=POP3 or AUTH (Firmware version R3.02 or
later)
YMp1,p2,p3,p4,p5,p6,p7
p1 SMTP server name (up to 64
characters)
p2 SMTP port number (1 to 65535)
p3 POP3 server name (up to 64
characters)
p4 POP3 port number (1-65535)
p5 Use authorization (OFF/POP3/AUTH)
OFF
POP3 Use POP before SMTP
AUTH Use SMTP Authentication
p6 User name (up to 32 characters)
p7 Password (up to 32 characters)
Query YM?
Example Enable POP3 before SMTP in the mail client settings.
YMsmtp_server.abc.com,25,pop3_server.abc.
com,110,POP3,YOKOGAWA,1234
Explanation • For the characters that can be used for the SMTP
server and POP3 server, see host and domain name
strings in section 1.3.
• For the characters that can be used for passwords,
see password strings in section 1.3.
• The password is output encrypted during a query.
YV Mail Sender and Recipient
Settings
Setting YVp1,p2,p3,p4
p1 Characters added to [Subject] (up to
32 characters)
p2 Recipient address 1 (up to 150
characters)
p3 Recipient address 2 (up to 150
characters)
p4 Sender address (up to 64 characters)
Query YV?
Example Set a mail recipient 1 and 2, and the sender.
YVALARM,[email protected],
[email protected],[email protected]
Explanation For the characters that can be used for the subject,
recipients, and sender, see user specified characters in
section 1.3.
1.6 Setting Commands (Communication Related)