Yokogawa Standalone MW100 - Manual (Page 48)

1-41 IM MW100-17E
Commands
1
2
3
App App
Index
1.7 Control Commands/1.8 Output Commands/1.8 Output Commands
CS Checksum Settings
Setting CSp1
p1 Checksum ON/OFF
0
None (do not calculate sum)
1 ON (calculate sum)
Query CS?
Example Turn checksum ON.
CS1
GR Resetting of the MATH Channels
Specified by the MATH Group
Setting GRp1
p1 MATH group number
1 to 7 Reset the MATH channels of
the specified MATH group
Example Reset the MATH channels of MATH group 1.
GR1
Explanation • You can set this command on products with the
/M1 MATH function option, or when the pulse input
module is installed.
• Resets the MATH channels assigned to a MATH
group using the MG command.
1.8 Output Commands
FD Output of Latest Measured/
Computed Data
Setting FDp1,p2,p3
p1 Output data type
0
Outputs the latest measured/
computed data in ASCII
1 Outputs the latest measured/
computed data in BINARY
p2 First channel (001 to 060 and A001 to
A300)
p3 Last channel (001 to 060 and A001 to
A300)
Example Output the most recent measured/computed data from
the instrument on channels 1 to 5 in ASCII format.
FD0,001,005
Explanation • The “latest measured/computed data,” refers to the
data most recently received into in the MW100’s
internal memory.
• If the first channel is 001 and the last channel is
A300, the data output is in the range 001 to 060 and
A001 to A300.
• Set a first and last channel so that the first is less
than or equal to the last.
FO Output of Latest Output Data
Setting FOp1,p2,p3
p1 Output data type
0
Outputs the latest output
channel data in ASCII
1 Outputs the latest output
channel data in BINARY
p2 First channel (001 to 060)
p3 Last channel (001 to 060)
Example Output the most recent output data from the instrument
on channels 1 to 5 in ASCII format.
FO0,001,005
Explanation Set a first and last channel so that the first is less than
or equal to the last.
FE Output of Decimal Place, Units,
and Setting Data
Setting FEp1,p2,p3
p1 Output type
0
Outputs the setting command
query
1 Outputs the decimal place and
units
p2 First channel (001 to 060 and A001 to
A300)
p3 Last channel (001 to 060 and A001 to
A300)