Output of communication logs (fl0, com), Output of communication logs (fl0, com) -16, Syntax – Yokogawa Standalone MW100 User Manual
Page 66: Example
2-16
IM MW100-17E
Output of Communication Logs (FL0, COM)
• Output using the FL command.
• The communication information log is output. Up to 200 past logs are retained. If that
number is exceeded, old logs are overwritten with new ones.
Syntax
EACRLF
yy/mo/dd_hh:mm:ss_nn_uuu...u_d:_mmm...mCRLF
........................................................
ENCRLF
yy
Year (00 to 99)
mo
Month (01 to 12)
dd
Day (01 to 31)
hh
hour (00 to 23)
mm
Minute (00 to 59)
ss
Seconds (00 to 59)
nn
Connection type (s0, e0 to e3)
s0:
General purpose communications (serial)
e0 to e3:
General purpose communication (Ethernet)
uuu...u User name (16 characters)
d:
Command/response (C/R)
C:
Command
R:
Response
mmm...m Message (command/response)
_
Blank
Example
EA
99/05/11 12:20:30 s0 admin C: FF0,001,010
99/05/11 12:20:31 s0 admin R: (Output)
99/05/11 12:31:10 s0 admin C: SR001,VOLT
99/05/11 12:31:11 s0 admin R: E1 123 System error
EN
2.2 ASCII Output