Yokogawa Standalone MW100 - Manual (Page 100)

3-6
IM MW100-17E
Once an instance has been properly configured, the MW100 inputs and outputs will show
up in the Controller Tags window.
MW100 Channels within RSLogix 5000 Controller Tags Screen
These points can now be assigned as inputs and outputs as well as monitored (when
online) within programs as shown in the example below. Note the tags can be used within
any logic element (not just MSG blocks as with Explicit Messaging). In this case the logic
is reading from the first input instance corresponding to Communication Channel C001
and writing to the output instance corresponding to Communication Channel C101.
Sample logic using I/O Messaging.
A step by step example of implicit messaging within RSLogix 5000 is detailed in appendix
8.
3.3 I/O Messaging (Implicit Messaging)