Yokogawa Standalone MW100 - Manual (Page 39)

1-32 IM MW100-17E
1.6 Setting Commands
(Communication Related)
UA User Settings
Setting When p2=OFF
UAp1,p2
When p2 is not OFF
UAp1,p2,p3,p4
p1 User number (01 to 10)
p2 User level
OFF
Do not use
ADMIN Administrator level
USER User level
p3 User name (up to 16 characters)
p4 Password (up to 8 characters)
Query UA[p1]?
Example Set User number 01 to an account with user name
YOKOGAWA at the administrator level. Set the
password to 1234.
UA01,ADMIN,YOKOGAWA,1234
Explanation • For the characters that can be used for user names,
see user specified characters in section 1.3.
• For the characters that can be used for passwords,
see password strings in section 1.3.
• The password is output encrypted during a query.
YS Serial Communication Settings
Setting When p1=NORMAL
YSp1,p2,p3,p4,p5,p6,p7
When p1=MODBUS_M or p1=MODBUS_S
YSp1,p2,p3,p4,p5
When Using as a General Purpose
Communication Server
Setting YSp1,p2,p3,p4,p5,p6,p7
p1 Function (NORMAL)
p2 Address (01 to 32)
p3 Baud rate [bps]
(1200/2400/4800/9600/19200/
38400/57600/115200)
p4 Parity
NONE
No parity
EVEN Even
ODD Odd
p5 Stop bit [bit] (1, 2)
p6 Data length [bit] (7, 8)
p7 Handshaking
(OFF:OFF,XON:XON,XON:RS,CS:RS)
Example Set the address to 01, baud rate to 9600 bps, parity to
even, stop bit to 1, data length to 8 bits, and handshaking to
XON:RS.
YSNORMAL,01,9600,EVEN,8,1,XON:RS
When using as a Modbus master or Modbus slave
Setting YSp1,p2,p3,p4,p5
p1 Function
MODBUS_M
Modbus master
MODBUS_S Modbus slave
p2 Address (1 to 247)
p3 Baud rate [bps]
(1200/2400/4800/9600/19200/
38400/57600/115200)
p4 Parity
NONE
No parity
EVEN Even
ODD Odd
p5 Stop bit [bit] (1, 2)
Example Set Address1 to the Modbus master, the baud rate to
9600 bps, parity to even, and stop bit to 1.
YSMODBUS_M,1,9600,EVEN,1
Explanation MODBUS_M of p1 can be set with the /M1 MATH
function option.
YA IP Address Settings
Setting YAp1,p2,p3
p1 IP address
(0.0.0.0 to 255.255.255.255)
p2 Subnet Mask
(0.0.0.0 to 255.255.255.255)
p3 Default Gateway
(0.0.0.0 to 255.255.255.255)
Query YA?
Example Set the IP address to 192.168.111.24, the subnet mask
to 255.255.255.0, and the default gateway to 0.0.0.0.
YA192.168.111.24,255.255.255.0, 0.0.0.0
Explanation The settings updated with this command are enabled
when the MW100’s power is turned OFF, then turned
back ON again.
YD Host Name and Domain Name
Settings
Setting YDp1,p2
p1 Host name (up to 63 characters)
p2 Domain name (up to 63 characters)
Query YD?
Example Sets the host name “some_host” and domain name
“abc.com”
YDsome_host,abc.com
Explanation For the characters that can be used for the host and
domain names, see host and domain name strings in
section 1.3.
1.6 Setting Commands (Communication Related)