App index – Yokogawa Standalone MW100 User Manual
Page 53
2-3
IM MW100-17E
Response
1
2
3
App
App
Index
2.1 Response Format
Data Sum
Sum value of binary data.
• Sum value is calculated only when “calculate sum” is set in the CS command. The value “0”
is stored in the sum value domain when “do not calculate sum” is set.
Flag
Flag value
Bits
Notation
0
1
Flag Meaning
7
BO
MSB
LSB
Byte order
6
CS
None
Y
Checksum
5
-
-
-
4
-
-
-
3
-
-
-
2
-
-
-
1
-
-
-
0
-
-
-
• The byte order is the data order of 2 or more bytes including the binary data portion. It
indicates that data is stored in the MSB (top byte) first or LSB (bottom byte) first.
• Checksum indicates whether a sum value is in the header sum and data sum domains, and
if the checksum value (CS) is 0, then 0 is stored in those domains.
• If a dash ( - ) is located in the notation or flag column, the bit is not used. The value is
indefinite.
Identifier
Identifier Binary Data Type
Format
0 Unspecified data
File
128 Unspecified data
Data
129 FIFO data
Data
130 The latest measured/computed data
Data
131 Latest output data
Data
132 FIFO read range
Data