Yokogawa Standalone MW100 - Manual (Page 10)

1-3
IM MW100-17E
Commands
1
2
3
App App
Index
1.2 List of Commands
Setting Commands (System Related)
Command Functions Operation Administrator User Page
Name Mode
SR Input Range Settings Setting Yes No 1-16
SF Filter Settings Setting Yes No 1-17
XB Burnout Settings Setting Yes No 1-17
XJ Reference Junction Compensation Settings Setting Yes No 1-17
PF Pulse Input Module Chattering Filter Settings Setting Yes No 1-17
SA Alarm Settings All modes Yes No 1-18
VA Alarm Hysteresis Settings All modes Yes No 1-18
XA Settings Related to Alarm Setting Yes No 1-18
BD Delay Alarm Settings Setting Yes No 1-19
XD Relay Settings Setting Yes No 1-19
SO Expression Settings Setting Yes No 1-19
SK MATH Constant Settings Setting Yes No 1-20
MG MATH Group Settings Setting Yes No 1-20
RO Report Operation and Creation Time Settings Setting Yes No 1-20
RM Report Execution Channel Settings Setting Yes No 1-20
VL Broken-Line Input Channel Settings Setting Yes No 1-21
AO Output Range Settings Setting Yes No 1-21
AP Preset Operation Settings Setting Yes No 1-22
SL Event/Action Settings Setting Yes No 1-22
SI Timer Settings Setting Yes No 1-24
SQ Match Time Settings Setting Yes No 1-24
XV Measurement Interval Settings Setting Yes No 1-25
XI Measurement Groups and A/D Integration Time Settings Setting Yes No 1-25
VM MATH Interval Settings Setting Yes No 1-25
XG Settings of Operation upon MATH Error Setting Yes No 1-25
MC File Message Settings Setting Yes No 1-26
MD Data Save Folder Settings Setting Yes No 1-26
MH Recording Channel Settings Setting Yes No 1-27
MW Recording Operation Settings Setting Yes No 1-27
ML Recording Data Length Settings Setting Yes No 1-28
MR Recording Free Space Settings Setting Yes No 1-28
MX Thinning Recording Operation Settings Setting Yes No 1-28
MU Setting Save Operation Settings Setting Yes No 1-28
XK Key Lock Settings All modes Yes No 1-28
XT Temperature Unit Settings Setting Yes No 1-29
SW Daylight Saving Time Settings Setting Yes No 1-29
SS Daylight Saving Time Operation Settings Setting Yes No 1-29
BA Settings of Strain Input Initial Balancing Setting Yes No 1-29
UN Unit Number Settings Setting Yes No 1-29
SV Rolling Average Settings Setting Yes No 1-29
Yes: Permitted to use command, No: Not permitted to use command
Note
• The instrument has two operation modes. If a command intended for use in one mode
is executed while in a different mode, an error results. Switch to the proper mode before
executing the command. Queries can be used regardless of the mode.
• Setting Mode
In this mode, measurement, computation, and recording is stopped, and settings can be
changed.
• Measurement Mode
Computation and recording can be executed during measurement.
• The administrator and user distinction shows the user level specified on the instrument’
s communication login function. For details, see the MW100 Data Acquisition Unit User’s
Manual (IM MW100-01E).
• Queries can be executed by both administrator and users.