Yokogawa RotaMASS 3-Series - Manual (Page 178)

APPENdIX 8. dEVICEVIEWEr WINdOW EXECUTEd FrOM FIELdMATE ANd PrM
a-78 IM 01R04B05-00E-E 3rd edition July 30, 2010 -00 all Rights Reserved. Copyright © 2005, Rota Yokogawa
Table A8.4 Configuration (Optional)
aI5 in o/S Mode(a-27) alarm aI5 Block is in o/S mode. (a-27)
[Remedy]: Change the aI5 Block Mode.target(aI5.MoDE_BLK.target) to auto or other mode.
In addition, check that RB Block Mode.actual(RB.MoDE_BLK.actual) is set to auto mode.
If it is an unused function, set aLaRM_PERFoRM bit4 to 0.
aI5 in Man Mode(W-25) Warning aI5 Block is in Man mode. (W-25)
[Remedy]: Change the aI5 Block Mode.target(aI5.MoDE_BLK.target) to auto or other mode.
aI5 Simulation active(W-45) Warning aI5 Block is simulation mode. (W-45)
[Remedy]: Change the aI5 Simulation En/Disable(aI5.SIMuLatE.SIMuLatE_EnaBLE) to Disabled.
aI5 not Scheduled(W-55) Warning aI5 Block is not scheduled. (W-55)
[Remedy]: Make a schedule of aI5 Block.
aI6 in o/S Mode(a-28) alarm aI6 Block is in o/S mode. (a-28)
[Remedy]: Change the aI6 Block Mode.target(aI6.MoDE_BLK.target) to auto or other mode.
In addition, check that RB Block Mode.actual(RB.MoDE_BLK.actual) is set to auto mode.
If it is an unused function, set aLaRM_PERFoRM bit5 to 0.
aI6 in Man Mode(W-26) Warning aI6 Block is in Man mode. (W-26)
[Remedy]: Change the aI6 Block Mode.target(aI6.MoDE_BLK.target) to auto or other mode.
aI6 Simulation active(W-46) Warning aI6 Block is simulation mode. (W-46)
[Remedy]: Change the aI6 Simulation En/Disable(aI6.SIMuLatE.SIMuLatE_EnaBLE) to Disabled.
aI6 not Scheduled(W-56) Warning aI6 Block is not scheduled. (W-56)
[Remedy]: Make a schedule of aI6 Block.
Simulation Switch on Warning Software or hardware simulation switch is on.
[Remedy]: Change the value of RB Sim Enable Message(RB.SIM_EnaBLE_MSG) or turn off the
hardware simulation switch.
Figure A8.4 Configuration (Optional)
aI1 not Scheduled(W-51) Warning aI1 Block is not scheduled. (W-51)
[Remedy]: Make a schedule of aI1 Block.
aI2 not Scheduled(W-52) Warning aI2 Block is not scheduled. (W-52)
[Remedy]: Make a schedule of aI2 Block.
aI3 not Scheduled(W-53) Warning aI3 Block is not scheduled. (W-53)
[Remedy]: Make a schedule of aI3 Block.
aI4 not Scheduled(W-54) Warning aI4 Block is not scheduled. (W-54)
[Remedy]: Make a schedule of aI4 Block.