Yokogawa RotaMASS 3-Series - Manual (Page 110)

APPENdIX 1. LIST OF PArAMETErS FOr EACH BLOCK OF rOTAMASS
a-10 IM 01R04B05-00E-E 3rd edition July 30, 2010 -00 all Rights Reserved. Copyright © 2005, Rota Yokogawa
relative
Index
Index Parameter Name Factory default Write
Mode
Explanation
54 2054 DISP_DECIMaL_MaSS_FLoW xxxx.XX - the decimal point position of the mass flow
value on the LCD display.
55 2055 DISP_DECIMaL_VoLuME_FLoW xxxx.XX - the decimal point position of the volume
flow value on the LCD display.
56 2056 DISP_DECIMaL_DEnSItY xx.XXXX - the decimal point position of the density
value on the LCD display.
57 2057 DISP_DECIMaL_tEMPERatuRE xxxxx.X - the decimal point position of the temperature
value on the LCD display.
58 2058 DISP_DECIMaL_ConCEntR_MEaS xxxx.XX - the decimal point position of the concentration
measurement value on the LCD display.
59 2059 DISP_DECIMaL_nEt_FLoW xxxx.XX - the decimal point position of the net flow
value on the LCD display.
60 2060 DISP_DECIMaL_It1 xxxxx.XX - the decimal point position of the out value
of It1 block on the LCD display.
61 2061 DISP_DECIMaL_It2 xxxxx.XX - the decimal point position of the out value
of It2 block on the LCD display.
62 2062 DISP_It1_unItS_InDEX none - the unit index of the out value of It1 block
on the LCD display.
63 2063 DISP_It2_unItS_InDEX none - the unit index of the out value of It2 block
on the LCD display.
64 2064 DISP_ContRaSt 4 - the contrast of the LCD display.
65 2065 DISP_PERIoD 1 s - the update cycle of the LCD display.
66 2066 DISP_LanGuaGE English - the language on the LCD display.
67 2067 FLoW_DIRECtIon Forward o/S Direction of flow
68 2068 BI_DIRECtIon Bi-direction o/S Selects the Bi-direction mode (bi-direction/
uni-direction).
69 2069 auto_ZERo_tIME 3 min o/S Defines the execution time of the autozero
function.
70 2070 auto_ZERo_EXE not Execute o/S a user can execute the autozero performing
by this parameter.
after autozero execution is completed, this
value returns to “not Execute” automatically.
the execution time is defined by auto_
ZERo_tIME.
71 2071 auto_ZERo_VaLuE Set after adjust-
ment - Indicates the result value of the autozero
execution.
72 2072 auto_ZERo_FLuCtuatIon Set after adjust-
ment - Indicates the factory autozero range.
73 2073 aZ_InIt_MaSS_FLoW Set after adjust-
ment - Indicates the last autozero value for mass
flow.
74 2074 aZ_InIt_DEnSItY Set after adjust-
ment - Indicates the density at the last autozero for
mass flow.
75 2075 aZ_InIt_tEMP Set after adjust-
ment - Indicates the temperature at the last
autozero for mass flow.
76 2076 MaSS_FLoW_FIX_VaL_SEL Inhibit o/S this parameter enables the function of
MaSS_FLoW_FIXED_VaLuE.
When the value is “Inhibit”, the function of
MaSS_FLoW_FIXED_VaLuE does not
perform.
When the value is “Enable”, the function of
MaSS_FLoW_FIXED_VaLuE performs.
77 2077 MaSS_FLoW_FIXED_VaLuE 0.0 t/h o/S this parameter indicates a fix mass flow
value. the set value is added to the
autozero value.
78 2078 DEnSItY_FIX_VaL_SEL Inhibit o/S this parameter enables the function of
REFEREnCE_DEnSItY.
When the value is “Inhibit” the function does
not perform. When the value is “Enabled”
the function performs.
If gas measurement (/Ga) is ordered, this
parameter is “Enabled”.