Watlow CLS - Manual (Page 44)

36 CLS User’s Guide
Installation
The next table shows scaling resistor values.
The following tables show the location of RA, RB, RC and RD on the
analog input boards of the 4CLS and the 8CLS. (The analog input board
is the upper board of the two-board set.)
Input Range RA RB RC RD
All T/C, 0-60 mV DC Jumper
RTD 1: -100.0 to
275.0
º C
RTD 2: -120 to 840 º C
10.0 Kohms
25.0 Kohms 10.0 Kohms
25.0 Kohms 80 ohms
100 ohms
0-10 mA DC
0-20 mA DC Jumper
Jumper 6.0 ohms
3.0 ohms
0-100 mV
0-500 mV 499 ohms
5.49 Kohms 750 ohms
750 ohms
0-1 VDC
0-5 VDC
0-10 VDC
0-12 VDC 6.91 Kohms
39.2 Kohms
49.9 Kohms
84.5 Kohms 422.0 ohms
475.0 ohms
301.0 ohms
422.0 ohms