beautypg.com

Printing configuration settings – ZOLL E Series Monitor Defibrillator Rev M User Manual

Page 9

background image

Printing Configuration Settings

9650-1201-01 Rev. M

3

Printing Configuration Settings

The default settings shown below are for North American units only. To print the current
configuration of your unit, while the unit is in the System Configuration mode, press the Print
Config
softkey from the Main System Configuration menu. For instructions on putting the unit
in System Configuration mode, refer to the previous section, “Entering System Configuration
Mode.”

Procedure

Press the Print Config softkey to print a stripchart of all the unit’s configuration parameters.