ZOLL E Series Monitor Defibrillator Rev M - Manual (Page 64)

Chapter 2 Configuration Parameters
58 9650-1201-01 Rev. M
Bluetooth Net Server List
This parameter allows you to set up and manage a ZOLL Data Relay server for sending 12-lead
reports via FAX or e-mail. The E Series unit can send data to up to 12 ZDR servers.
Before adding a server, you must obtain the necessary server parameters from your ZDR server
administrator (IP address, port number, etc).
Procedure
To configure your ZOLL Data Relay server on the E Series unit:
5. Select Transmission Type — Use the scroll
keys on top of the unit to select the desired type
of transmission to the recipient:
• ZDR Server Dist. List
• ZDR Server Email
• ZDR Server FAX
• Direct FAX (sending a FAX via modem)
Press the Prev softkey to return to the previous
screen. To cancel the contact configuration and
return to the contact list, press the Cancel
softkey.
Press the Next softkey to advance to the next
screen.
6. If Direct Fax is selected, you will be prompted to
enter the phone number. Use the scroll keys on
top of the unit to select a number on the keypad.
For a distribution list, e-mail address, or FAX via
direct server, you will be prompted to select a
server. To set up a server, see “Bluetooth Net
Server List”, below.
7. Confirm Contact Information — You will then
be asked to confirm your contact information.
Press Accept to save your configuration and
return to the contact list menu. Press Prev to go
back to the previous menu to make additional
changes. To cancel the contact configuration and
return to the contact list, press the Cancel
softkey
Step Action
Cancel
1
System Configuration
Select Transmission Type
ZDR Server Dist. List
ZDR Server Email
ZDR Server FAX
Direct FAX
Next Prev
Cancel
1
System Configuration
Confirm Contact Information
Name:
Xmit Type:
Phone No:
Server ID:
Dr. P
ZDR Server FAX
978-555-0625
ZDR Server 1
Prev Accept