ZOLL E Series Monitor Defibrillator Rev M - Manual (Page 13)

9650-1201-01 Rev. M 7
Chapter 2
Configuration Parameters
This chapter describes all of the configuration parameters on the E Series and includes the
following sections.
• “General Parameters” on page 8
• “ECG Monitoring Parameters” on page 12
• “Tone Parameters” on page 14
• “Basic Defibrillation Parameters” on page 15
• “Advisory Defibrillation Parameters” on page 16
• “Semi-Auto Mode Parameters” on page 24
• “Pace Parameters” on page 28
• “12-Lead Parameters” on page 29
• “EtCO2 Parameters” on page 35
• “NIBP Parameters” on page 37
• “Alarm Parameters” on page 39
• “Trending Parameters” on page 42
• “Display Parameters” on page 43
• “Set Report Restart Delays Parameters” on page 46
• “Printer Parameters” on page 47
• “Data Card Parameters” on page 49
• “Time Parameters” on page 53
• “Communications Parameters” on page 55
• “CPR Parameters” on page 55
Note: The instructions in this chapter assume that you powered on the unit in System
Configuration mode as described in “Entering System Configuration Mode” on
page 2, and are familiar with how to access the parameters, see “Accessing and
Changing Configuration Parameters” on page 6.