ZOLL E Series Monitor Defibrillator Rev M - Manual (Page 50)

Chapter 2 Configuration Parameters
44 9650-1201-01 Rev. M
SpO
2
Color
This parameter allows you to specify the color of the SpO
2
information displayed on the
E Series monitor.
Values are as follows:
SpCO Color
This parameter allows you to specify the color of the SpCO information displayed on the
E Series monitor.
SpMet Color
This parameter allows you to specify the color of the SpMet information displayed on the
E Series monitor.
EtCO
2
Color
This parameter allows you to specify the color of the EtCO
2
waveform and information
displayed on the E Series monitor.
Values are as follows:
NIBP Color
This parameter allows you to specify the color of the NIBP information displayed on the
E Series monitor.
Values are as follows:
Possible Values: Red, Cyan, Purple, Blue, Green, Yellow, White
Default: Blue
Possible Values: Red, Cyan, Purple, Blue, Green, Yellow, White
Default: Red
Possible Values: Red, Cyan, Purple, Blue, Green, Yellow, White
Default: Cyan
Possible Values: Red, Cyan, Purple, Blue, Green, Yellow, White
Default: Yellow
Possible Values: Red, Cyan, Purple, Blue, Green, Yellow, White
Default: White