ZOLL E Series Monitor Defibrillator Rev M - Manual (Page 55)

Data Card Parameters
9650-1201-01 Rev. M 49
Data Card Parameters
Data Card Parameters are attributes that control what gets recorded to the PCMCIA card,
whether or not you can erase a card, and how the card operates; these parameters include:
• Record ECG Data in Advisory Mode
• Record Audio in Advisory Mode*
• Record SpO2 in Advisory Mode*
• Record EtCO2 in Advisory Mode*
• Report Memory Card Errors
• Allow Card Erase
• Card Capacity Message Enabled
• Erase Card Prompt at Pwr Off
• Remove Card Prompt at Pwr Off
• Sync Defib Excluded
* These parameters can be set to Yes only if the Record ECG Data in Advisory Mode
parameter is set to Yes.
Record ECG Data in Advisory Mode
This parameter allows you to set the unit to record the ECG waveform continuously to the
PCMCIA card while in Manual/Advisory mode.
Values are as follows:
Record Audio in Advisory Mode
This parameter allows you to set the unit to record audio data continuously to the PCMCIA
card while in Manual/Advisory mode.
Values are as follows:
Possible Values: Yes, No
Default: No
Possible Values: Yes, No
Default: No