ZOLL E Series Monitor Defibrillator Rev M - Manual (Page 16)

Chapter 2 Configuration Parameters
10 9650-1201-01 Rev. M
Configuration Mode Passcode
This feature allows you to set an 8-digit system configuration passcode. Once set, only those
people who know the passcode can access configuration mode and modify parameters.
Values are as follows:
Procedure
Follow these steps to set up a configuration mode passcode:
3. Use the softkey as follows:
• Prev Letter — moves the highlight left to the
previous digit.
• Inc Letter or Dec Letter — increments or
decrements the selected digit.
• Next Letter — moves the highlight right to the
next digit to be entered.
• Enter— saves the values that you entered
and returns the unit to the General
Configuration menu.
Step Action
Possible Values: 0 through 3 inclusive for each digit
Default: 00000000
Step Action
1. Press the Change Config softkey from the Main
System Configuration screen.
The Parameter Categories screen appears
Select General, then press the Enter softkey.
2. Select Configuration Mode Passcode and press
the Change Value softkey.
The Set Configuration Passcode screen is
displayed.
Enter Return
Next
Item Prev
Item
System Configuration
1 of 7
ECG
Tones
Set/Review
General Set/Review
Set/Review
Prev
Digit Next
Digit
Enter
Dec
Digit
Inc
Digit
System Configuration
Set Configuration Passcode
0 0 0 0 0 0 0 0