beautypg.com

12 lead secs per lead, 12 lead print speed, Ptca message enabled – ZOLL E Series Monitor Defibrillator Rev M User Manual

Page 39

background image

12-Lead Parameters

9650-1201-01 Rev. M

33

12 Lead Secs Per Lead

This parameter allows you to set the number of seconds of ECG data printed for each lead on
the 12-lead 4x3 strip. This setting affects only 12-lead reports generated by pressing the
Acquire softkey.

Values are as follows:

12 Lead Print Speed

This parameter allows you to set the print speed of the 12-lead 4x3 reports. This setting affects
only 12-lead reports generated by pressing the Acquire softkey.

Values are as follows:

PTCA Message Enabled

This parameter allows you to review, or make changes to, Percutaneous Transluminal Coronary
Angioplasty (PTCA) settings if the E Series unit includes the 12-Lead Reperfusion Algorithm
option. It determines whether or not the E Series unit prints a PTCA message (if appropriate).

Values are as follows

:

Possible Values:

2.5, 5.0, 7.5, 10.0 seconds

Default:

2.5 seconds

Possible Values:

25 mm/second, 50mm/second

Default:

25 mm/second

Possible Values:

Yes, No

Default:

Yes