Levenhuk C800 NG Digital Camera, USB 2.0 - Manual (Page 37)

Help Manual
29
4. Move the mouse until the cursor becomes , this means the cursor is now
right on the Object . Clicking it will highlight and select the Measurements Object ;
5. Optional 1: Continue to move the mouse until the cursor becomes , this means
the cursor is now right on another object. Clicking it with SHIFT+left mouse button
and the second object will be selected and highlighted;
6. Optional 2: (1) Move the cursor over the image, click down the left mouse button.
(2)Drag the mouse to draw a rectangle on the image. A dotted rectangle will appear
around the selected area. (3) Release the mouse and all of the Measurement objects
within the dotted rectangle will be highlighted and selected;
7. After the Measurement objects are selected, the Edit>Copy will be enabled;
8. Choose Edit>Copy to Copy the object(s) to the clipboard. Then the Edit>Paste
menu will be enabled. One can then Paste the objects onto the Current Layer or onto
the other Measurement Layer . If one switches to the Background Layer , the Paste
command will be disabled, but if one returns to the Measurement Layer , the Paste
command will be enabled again.
Note : 1) If there is no Measurement object selected, the Edit>Copy command will be
disabled. Edit>Copy will not delete the Measurement objects over the image. Any
data already existing on the clipboard will be replaced with the new data;
2) The copied object(s) can be pasted into the active window or into another
opened window using the Edit>Paste command as long as the current window is not
on the Background Layer (the command is disabled). See the View>Sidebar>Layer