Levenhuk C800 NG Digital Camera, USB 2.0 - Manual (Page 22)

Help Manual
14
6.3 Camera List
ToupView will detect all of the cameras that your computer has installed (Here, it is
UCMOS03100KPA , a 3.1M pixel CMOS camera) and will append all the camera names
as submenu to File>Camera List menu (Here, the submenu name is
“ UCMOS03100KPA ”).
Choosing File>Camera List> UCMOS03100KPA will create a Video window and begin
to start the Video stream. Your Video window will be associated with the name of
“ Video [UCMOS03100KPA] ” (i.e., its title bar will display “ Video
[UCMOS03100KPA] ”).
There are 3 methods to start the camera Video stream, they are:
1. Choose File>Camera List>UCMOS03100KPA (Here, a 3.1M pixel camera is
installed) command to create the camera Video window;
2. Click Camera bar (If it is not activated) and Camera List to expand the Camera List
group (if not expanded). Click the camera name (Here it is UCMOS03100KPA ) to
create the Video window;
3. Click the ’s down arrow to expand the camera list and choose the right camera
(Here it is UCMOS03100KPA ) to create the Video window.
Note : 1) Only a single Video can be opened at a time. ToupView takes camera as an
extra Video file, if the camera Video window is opened, the File>Open Video••• menu
will be disabled and the Video file cannot be opened anymore;
2) If a Video file is opened, the camera cannot be started.
6.4 Twain: Select Device•••
Twain is a cross-platform interface for acquiring images captured by certain scanners,
digital cameras, or frame grabbers. The manufacturer of the Twain Device must