Levenhuk C800 NG Digital Camera, USB 2.0 - Manual (Page 33)

Help Manual
25
7 Edit
7.1 Undo/Redo Ctrl+Z
Most of the operations in ToupView can be undone. Alternatively, one can restore all
or part of an image to its last saved version. The basic
Undo process is:
1. Choose Open Image••• to open an image;
2. Choosing Image>Adjust>Auto Level , then Edit>Undo will be enabled;
3. Choosing Edit>Undo command will cancel the Image>Auto Level operation and
return the image to its initial opened state.
If return to the Edit menu, one will find that Edit>Undo now becomes Edit>Redo . You
can select one of these two operations to see the Undo and Redo mechanisms:
1. Choosing Edit>Redo will return the image to Image>Auto Level status and
Edit>Undo will be enabled again;
2. Choosing Image>Auto Contrast , then Edit>Redo will become Edit>Undo ;
Note : ToupView supports only one step Undo and Redo operations.
7.2 Forward