FEC MICRO NR - Manual (Page 9)

Install all tools firmly where they can bear the maximum torque during operation.
Failure to observe this instruction may cause injury and malfunction.
Install the controller Unit firmly inside the control panel using the specified screws.
Failure to observe this instruction may cause malfunction.
Use the specified tool for the controller Unit.
Failure to observe this instruction may cause fire and malfunction.
The controller Unit shall maintain the specified distance from other devices.
Failure to observe this instruction may cause fire and malfunction.
Do not block the ventilation holes of the controller Unit.
Avoid any foreign body from entering inside the equipment.
Failure to observe this instruction may cause fire and malfunction.
The power source shall be provided with safety measures such as breakers and
circuit protectors. Failure to observe this instruction may cause fire and malfunction.
Do not use tools or controller Units that are damaged or missing parts.
Failure to observe this instruction may cause fire, injury, and malfunction.
Do not get on the top of equipment or do not place heavy objects on the top of equipment.
Failure to observe this instruction may cause injury, and malfunction.
Do not subject the equipment to excess shock and impact.
Failure to observe this instruction may cause malfunction.
Conduct wirings properly and firmly.
Failure to observe this instruction may cause injury, false operation, and malfunction.
Operate the equipment within the specified power supply voltage.
Failure to observe this instruction may cause injury, electric shock, fire, and malfunction.
When operating the equipment in the following conditions, take sufficient measures
to shield the equipment.
◆Location where electrical noise is generated
◆Location where the equipment is subjected to a strong electric field or magnetic field
◆Location near a high power wire.
Failure to observe this instruction may cause injury, false operation, and malfunction.
Caution
Safety Precautions
Installation / Wiring