FEC MICRO NR - Manual (Page 74)

Chapter 7: System Operations
Page 7-6
5) At the end of the fastening cycle the results will be displayed.
■ Fastening Accepted ■ Fastening Rejected
6) If a memory card is installed for saving cycle data, the status of the card will be displayed
alternatively between the fastening cycle results display or ready display.
■ Memory card writing ■ Memory card Full ■ Memory card
space warning
7) When the system is communicating with the User Console computer (Upload, Download, etc.),
the following will be displayed.
■ UC communication
Version display
Use [  ] and [  ] keys to change to the Firmware Version Display mode during while in the
Status Display mode.
The controller firmware version will be displayed in the [DATA] portion of the display. The
lower [PARM] & [D-NO] portion will display the servo amp version Lower portion displayed
servo amp firmware version.
Example showing controller firmware version A1.07 and servo amp firmware version 0001