FEC MICRO NR User Manual
Page 16
Chapter 1: Outline
Page 1-2
1.1
About This operations manual
This manual details the configuration, components, specifications, and the operation of the
MNR-
8
Micro Nutrunner Fastening System.
The following table outlines the contents of each chapter:
Chapter
Item
Contents
Chapter 1
Outline
Basic characteristics and requirements of the
MICRO
NUTRUNNER
System.
Chapter 2
Specifications
General specifications of the
MICRO NUTRUNNER
System.
Chapter 3
System Description
Description of standard and optional system
components.
Chapter 4
System Setup and Wiring
Equipment installation procedure, dimensions, Input
and Output signal descriptions and requirements for
PLC programming.
Chapter 5
Power Up and Initial Checks Preliminary power on and operational tests.
Chapter 6
Fastening Instructions
Basic fastening operations and presetting procedures.
Chapter 7
System Operations
Instructions for the input of preset data and monitoring
explanations.
Chapter 8
Maintenance and Inspection Guide for preventive maintenance.
Chapter 9
Troubleshooting
Descriptions of fastening rejects, abnormal operation
faults, and corrective actions.
Appendix A
Reference Drawings
Electrical reference drawings of standard cables and
connections.