FEC MICRO NR - Manual (Page 12)

Chapter 5: Power Up and Initial Checks 5-1
5.1 Before Powering On 5-2
5.2 Initial Data Setting 5-3
Chapter 6: Fastening Instructions 6-1
6.1 Fastening Control 6-2
6.1.1 Torque / Angle Method – Target Torque Control 6-2
6.1.2 Torque / Angle Method
– Target Angle Control
6-4
6.2 Speed Functions 6-6
6.3 Reverse Functions 6-8
6.4 Special Functions 6-9
6.4.1 One Pulse Reverse Function 6-9
6.4.2 Rundown Revolution Limits 6-10
6.4.3 Torque Inhibit Function 6-11
Chapter 7: System Operations 7-1
7.1 MNR Display and Programming operation. 7-2
7.1.1 Manual Fastening controls for Display Programming Unit 7-2
7.1.2 Fastening Preset / Results Display 7-3
7.1.3 Fastening Presetting / Result Display Controls 7-3
7.2 Display Indication Modes. 7-4
7.2.1 Status Display 7-5
7.2.2 Real-time display indication mode. 7-8
7.2.3 Fastening results display mode. 7-10
7.2.4 Parameter display mode 7-11
7.2.5 Parameter Data List 7-13
7.3 Parameter Display, Select and Data Edit Operation 7-18
7.3.1 Parameter Select Mode 7-18
7.3.2 Data Edit Mode 7-19
7.3.3 Parameter Setup Confirmation 7-20
7.4 Torque Unit / RS232C / Memory Card Display Mode 7-21
7.4.1 Torque Unit Display / Edit Mode 7-22
7.4.2 RS232 Display / Edit Mode 7-23
7.4.3 Memory Card Station Name Display / Edit Mode 7-24
7.4.4 Memory Card Data Save Display / Edit Mode 7-25
7.4.5 Memory Card Data File Update by Size Display / Edit Mode 7-26
7.4.6 Memory Card Data File Update by Time Display / Edit Mode 7-27
7.4.6.1 Memory Card X-Y Curve Size Setup 7-27
7.4.7 Memory Card Abnormal Display / Edit Mode 7-28
7.4.8 Torque Unit / RS232C / Memory Card Data Update Confirmation 7-28
Chapter 8: Maintenance and Inspection 8-1
8.1 Inspection Items 8-2
8.1.1 Nutrunner (Tool) 8-2
8.1.2 Homerun cables 8-2
8.1.3 MNR Unit 8-3
8.1.4 Air Handling Units (Air Conditioner, Heat Exchanger, etc.) 8-3
8.2 Basic operational tests 8-4
8.2.1 Torque transducer. 8-4
8.2.2 Resolver. 8-4
8.3 Replacements 8-5
8.3.1 MNR Unit Replacement 8-5
8.3.2 Replace Nutrunner (tool) 8-6
8.3.3 Replace Homerun cables 8-6