FEC MICRO NR - Manual (Page 111)

FEC Micro Nutrunner Operations Manual Chapter 9: Troubleshooting (Rev. 2: 02/12)
Page 9-9
9.7 Servo Type Error
9.7.1 Code 6-0 SERVO TYPE ERROR / SERVO TYPE MISMATCH
The MNR Unit model does not match the connected motor type.
1. Verify the servo type tag with the motor type tag.
2. There are multiple types of MNR Units (controllers) available & they must be connected to
the correct motor size as shown in the table below.
TOOL TYPE
ORIGINAL SERVO
TYPE
MFT-080M10-S MNR-8