FEC MICRO NR - Manual (Page 77)

FEC Micro Nutrunner Operations Manual Chapter 7: System Operations (Rev. 2.1: 12/12)
Page 7-9
Motor Lock Function
When [SET] is pressed during the Torque/Angle display, the motor is locked
for up to one minute allowing the spindle to be checked with a torque wrench
while displaying the reaction torque. Press RESET to unlock the Motor before
one minute has expired. WARNING: Do not repeat this procedure repetitively
or the motor will overheat.
Real time display mode list
Item
DATA
NUMBER
[D-NO]
PARAMETER
[PARM]
DATA
Torque／
Angle
Rotation angle［deg］ Torque [Nm/Kgm/Kgcm/Ftlb/Inlb]
Torque V
／Origin V
Origin Voltage [V] Torque Voltage［V］
DATE
Year low
2 digit
Month - Date
TIME Second Hour - Minute
Memory card
drive status
：Not installed
：Installed
：Ready
：Warning
：Card full (No space)
：Reading
：Writing
Memory card
empty sectors
The number of memory card empty
sectors［K］
Memory card
fastening da-
ta writing time
Memory card fastening data writing
time［msec］