FEC MICRO NR - Manual (Page 40)

Chapter 4: System Setup and Wiring
Page 4-6
4.3 Wiring PLC I/O
The MNR I/O can accommodate both active true low (sinking NPN) or active true high (sourcing
PNP) interface devices depending on the wiring configuration. (See PLC Wiring Example 4.4.3)
Outputs Max: 30V 50mA
Inputs Max:
30V 7mA
As viewed from the front of the MNR Unit.
FIG. 4-3-1 MNR Unit PLC Connector
CAUTION:
The PLC I/O wiring must be routed a minimum of 300 mm away from
any transient high voltage sources. Cable length must not exceed 50 feet.
STATUS
PLC
CN2 T/D
RESOLVER
PLC Connector
Manufacturer: Hirose
Connector Model #: DF1E-14S-2.5C
Terminal Model#: DF1B-2428SC
or 0V
or +24V