FEC MICRO NR User Manual
Page 20
Chapter 1: Outline
Page 1-6
{
{
{
{
Static Electricity
MICRO NR
System construction incorporates many electronic Surface Mounted Devices.
(SMD) It is advisable to strictly adhere to practices for safe electrostatic discharge in order to
prevent damage to the System when handling the units.
{
{
{
{
Cleaning
Do not use any organic solvents, such as thinner, to clean an MNR unit or a tool. The solvent
could melt the surface paint, or penetrate inside and cause damage. A cloth dampened with
alcohol or warm water should be used to lightly wipe the components.
{
{
{
{
Handling and Shipping
It is critical that
MICRO NR
System components are properly handled and shipped in order to
maintain the System's integrity. Adhere to the following requirements for shipping and
handling:
P
Loose
MICRO NR
System components must be individually packaged in an approved anti-
static container or wrap to prevent damage from electrostatic discharge.
P
Tighten mounting screws on all back panel mounted fastening controllers.
P
Use care to wrap components to protect from moisture exposure during shipping
P
All non-painted / coated metal parts (except for the tool motor and connectors) must be
greased or oiled to prevent rust.
P
Adhere to Chapter 2 Specifications for environmental requirements.