FEC MICRO NR - Manual (Page 114)

Chapter 9: Troubleshooting
Page 9-12
9.8.8 Code 8-12 SERVO AMPLIFIER ERROR / AMPLIFIER PARAMETER ERROR
An error has occurred in the Amplifier Parameter.
RECOVERY:
1. Turn the power off. Wait at least 5 minutes and then turn power back on again.
9.8.9 Code 8-13 SERVO AMPLIFIER ERROR / AMPLIFIER PROGRAM ERROR
An error has occurred in the Amplifier Program.
RECOVERY:
1. Turn the power off. Wait at least 5 minutes and then turn power back on again.
9.8.10 Code 8-15 SERVO AMPLIFIER ERROR / PDU ERROR
An error has occurred in the PDU.
RECOVERY:
1. Turn the power off. Wait at least 5 minutes and then turn power back on again .
9.8.11 Code 8-16 SERVO AMPLIFIER ERROR / CPU ERROR
An error has occurred in the CPU.
RECOVERY:
1. Turn the power off. Wait at least 5 minutes and then turn power back on again.
9.8.12 Code 8-17 SERVO AMPLIFIER ERROR / WATCH DOG ERROR
An error has occurred in the Watch Dog circuit.
RECOVERY:
1. Turn the power off. Wait at least 5 minutes and then turn power back on again.