Micromod Micro-DCI: 53MT6000 Micro-Tools - Manual (Page 82)

53MT6000 INSTRUCTION MANUAL
66 Database Editor
Read Only: Entering a 1 prevents an operator from changing the state of points
via controller front panel buttons. Clicking on the field enables the
following selections:
No
Yes
Selecting "No" enters a "0" in the field while selecting "Yes" enters
a "1".
State: State of the point; clicking on the field enables the following
selections:
No
Yes
Selecting "No" enters a "0" in the field while selecting "Yes" enters a
"1".
Alm. ACK: Alarm acknowledge. This parameter allows individual status’s that
are in alarm to be acknowledged. Clicking on the field enables the
following selections:
No
Yes
Selecting "No" enters a "0" in the field while selecting "Yes" enters a
"1".
OK: Saves changes, closes window and returns to main menu.
Save: Saves changes without closing window.
Cancel: Cancels changes and returns to main menu.
ENTRY EXPLANATION