Micromod Micro-DCI: 53MT6000 Micro-Tools - Manual (Page 59)

53MT6000 INSTRUCTION MANUAL
Database Editor 43
• Execute the custom F-CIM sequence (B000 = 99):
The user can configure the controller to perform a custom sequence of up to 100 steps, each
step executing an F-CIM module (refer to the 53MC5000 Customization Guide).
• Execute a custom F-TRAN program (B000 = value of 2 to 89 or 101 to 255):
If the controller is an "extended functionality" unit, the user can write and execute custom
control programs (including custom displays if desired). More then one custom program (and
display) can be loaded simultaneously into the controller. Each custom control program is
assigned its own FIX number within the valid ranges. When one of these custom FIX numbers
is assigned to B000, the 53MC5000 executes that particular custom program. Details of
creating custom control and display programs is described in the 53MC5000 Customization
Guide.
• Custom PROM support:
A special application of F-TRAN programming includes the creation of a custom PROM.
Normal F-TRAN programs are loaded into battery-backed RAM memory for execution. The
creation of a custom PROM allows the F-TRAN program to reside in PROM memory for added
protection or special customer applications. If you are interested in using a custom PROM for
a unique situation, contact your MicroMod Automation representative.
❢
CAUTION
IF DEFAULT THE DATABASE IS SELECTED (FIX98), ANY
EXISTING CONFIGURATION IN THE CONTROLLER WILL
BE OVERWRITTEN WHEN DEFAULT VALUES ARE
WRITTEN TO THE DATABASE.