Micromod Micro-DCI: 53MT6000 Micro-Tools - Manual (Page 66)

53MT6000 INSTRUCTION MANUAL
50 Database Editor
The window for the SYSTEM module contains the entries listed below:
ENTRY EXPLANATION
Unit Tagname: Tagname of this instrument [A08]
Function Index: The value of the Function Index (FIX) is displayed.
The operating modes determined by this value are described in
the Instruction Manual. Briefly:
SUSPEND MODE [0]: The control program is not running,
although inputs continue to be measured, and totalizers and
trends continue to update. Outputs reflect the contents of their
associated database points. The display will show the MicroMod
Automation logo.
FLEXIBLE CONTROL STRATEGY [1]: The controller is running
one of the built-in Flexible Control Strategies described in the
FLEXIBLE CONTROL STRATEGY guide.
DISPLAY TEST [97]: A series of three test patterns will appear on
the controller’s display. The control program is stopped, but the
database is unchanged.
INITIALIZE DATABASE [98]: The database is set to factory
default values. The entire database, except for analog I/O
calibration constants, and some text strings will be set to the
default values shown in Appendix D of the Instruction Bulletin.
F-CIM [99]: In extended functionality controllers this enables the
use of F-CIM configuration as described in the Instruction Manual.
F-CIM configuration uses its own set of modules; a sequence of
up to 100 modules can be executed continuously in a user-
specified order at a user-specified rate.
OTHER [USER-DEFINED] FIX of a custom control F-TRAN
program:
In extended functionality controllers this selection can be used to
enter the control FIX assigned to a custom control program.
Customer control programs are written using MicroMod
Automation’s programming language F-TRAN. F-TRAN is
described in the 53MC5000 Customization Guide.
Link List Load: Clicking on the "down arrow" reveals a list of 11 selections, these
are:
One Loop Controller
Analog Backup Controller
Ratio Controller
Auto/Manual Station
Ratio Auto/Manual Station
Two Loop Controller
Two Loop Cascade
Two Loop Override
Dual Two Loop Cascade
Four Loop Controller
Default Wirelist