Micromod Micro-DCI: 53MT6000 Micro-Tools - Manual (Page 79)

53MT6000 INSTRUCTION MANUAL
Database Editor 63
Control Alarm Ack: This database parameter is used to acknowledge the control
module alarms.
Control Set Point: This parameter displays the setpoint value to be used for the
final control. This setpoint value has the setpoint slewing
applied. [C119]
Remote Set Point: This parameter is used to display the Remote Setpoint value.
This value is used when the Remote Setpoint mode is selected
[C120].
Deviation: Displays value of process variable deviation from setpoint.
Feed Forward: This parameter is a bias value added to the output as
necessitated by the process for proper control [C122].
Reset Feedback: Displays the value reset term of the PID function. This term is
used in the output calculation [C127].
Setpoint Track: This parameter is the Setpoint Track Value applied to the
Setpoint generator when the Setpoint Tracking Status is equal
to 1.
OK: Saves changes, closes window and returns to main menu.
Save: Saves changes without closing window.
Cancel: Cancels changes and returns to main menu.
ENTRY EXPLANATION