Micromod Micro-DCI: 53MT6000 Micro-Tools - Manual (Page 69)

53MT6000 INSTRUCTION MANUAL
Database Editor 53
7.4.6 Display List Configuration
Clicking on the DISPLAY button at the right side of the Database Editor window will open the window
shown in
Figure 7-9 :
Use this module window to set the number of rows and columns in the display list and also to assign dis-
play programs. Once the number of displays has been established by adjusting the number of rows and
columns, select a position in the matrix and click in the box. A drop down menu is used to select from a list
of standard displays. Displays may be assigned to any location in the matrix and may appear as many
times as desired within the matrix. Custom display programs are assigned by entering the display index
number assigned to the display.
7.4.7 CONTROL MODULE Configuration
Clicking on the CON button at the right of the Database Editor window will open the window shown in
Figure 7-10 :
Figure 7-9. Configuration Window
Figure 7-10. Controller Configuration Window