Micromod Micro-DCI: 53MT6000 Micro-Tools - Manual (Page 37)

53MT6000 INSTRUCTION MANUAL
Overview of User Interface 21
5.0 OVERVIEW OF USER INTERFACE
Because the Micro-Tools software runs under the Microsoft Windows operating system, the point-and-click
user interface with its menu bars, pop-up windows, radio buttons, and so on, should be familiar to many
users.
5.1 Starting the Micro-Tools Software
The setup program for the Micro-Tools software adds the Micro-Tools icon to a program group called
"Micro-Tools" by default. Clicking on the Micro-Tools icon starts the Micro-Tools application.
If Super32 is installed, Micro-Tools may also be started from within the Super32 window by clicking on a
controller icon.
5.2 The Micro-Tools Window
The Micro-Tools (Administrator) and Project Manager windows ( Figure 5-1 ) are opened by clicking on the
Micro-Tools icon. The Administrator window includes the following:
• title bar with sizing controls
• menu bar
• status bar
• project toolbar
• application toolbars
If Micro-Tools is started by clicking on an "on-line" controller icon from within Super32, the Micro-Tools
(Administrator) and Database Editor windows (illustrated in
Figure 5-1 ) are opened. The Administrator win-
dow includes the following:
• title bar with sizing controls
• menu bar
• status bar
• project toolbar
• application toolbars