Micromod Micro-DCI: 53MT6000 Micro-Tools - Manual (Page 77)

53MT6000 INSTRUCTION MANUAL
Database Editor 61
7.4.7.6 TREND Configurable Parameters
The control module TREND parameters can be configured by clicking on the TREND button. The window
shown in
Figure 7-15 will be displayed. The database locations where these values are stored for CON0
are shown in brackets [ ].
Figure 7-15. Trend Parameter Configuration Window
ENTRY EXPLANATION
Tagname: Tagname of the CON module [A00].
Trend Rate: Trend sample rate, in seconds [B336]. Available selections:
0
1
2
3
4
5
6
10
12
15
20
30
60
Trend Mode: This database parameter is used to select the mode of the
process variable trend. Available selections [B337]:
Instantaneous
Average
Maximum
Minimum
OK: Saves changes, closes window and returns to main menu.
Save: Saves changes without closing window.
Cancel: Cancels changes and returns to main menu.