B&K Precision 2516 - Manual - Manual (Page 98)

98
LRR, LRF, LFR, LFF measurement.
,
,
, ,
, ,
Display the corresponding icon
for the selected delay
measurement as well as the
measured value.
Return Return to the Measure menu.
Phase – Phase difference
between two waveforms
LRR – Time between first rising
edge of CH1 and last rising
edge of CH2
FRR – Time between first
rising edge of CH1 and
first rising edge of CH2
LRF – Time between first rising
edge of CH1 and last falling
edge of CH2
FRF – Time between first
rising edge of CH1 and
first falling edge of CH2
LFR – Time between first
falling edge of CH1 and last
rising edge of CH2
FFR – Time between first
falling edge of CH1 and
first rising edge of CH2
LFF – Time between first
falling edge of CH1 and last
falling edge of CH2
FFF – Time between first
falling edge of CH1 and
first falling edge of CH2
Display All Measurements
You can enable all voltage measurements, all time measurements, or all
delay measurements to display on the screen. You can also show all 32
total automatic measurements on the display.
From the Measure menu, press to select All Mea.
Then, select the single source to show its corresponding measurements by
toggling to set Source as CH1 or CH2. Press to toggle On
or Off displaying all voltage measurements. Press to toggle On or
Off displaying all time measurements. Press to toggle On or Off
displaying all delay measurements.