B&K Precision 2516 - Manual - Manual (Page 73)

73
Time
Set time
Use the arrow keys to set
slope time. The time range is
20 ns – 10 s.
Next Page Page 1/2
Enter the second page of the
Slope Trigger Menu.
Table 23 - Slope Trigger Menu 2/2
Menu
Option
Setting Description
Type Slope Select slope trigger.
Vertical
(Set high trigger level
position of rising edge)
(Set low trigger level
position of rising edge)
(Set high and low
trigger level position of rising
edge)
(Set high trigger level
position of falling edge)
(Set low trigger level
position of falling edge)
(Set high and low
trigger level position of
falling edge)
Selects the high and low trigger
level that can be adjusted for
slope trigger. Use this to set
the boundaries for the slope
trigger.
Mode
Auto
Use this mode to let the
acquisition free-run in the
absence of a valid trigger; This
mode allows an un-triggered,
scanning waveform at 100
ms/div or slower time base
settings.
Normal
Use this mode when you want
to see only triggered
waveforms; the oscilloscope
does not display a waveform