B&K Precision 2516 - Manual - Manual (Page 87)

87
Figure 45 - System Information Display
To exit and go back to the main menu, press .
Enable/Disable Key Sound
The key press sound can be enabled or disabled from the Utility Menu 1/4.
Press to toggle the Sound option to enable or disable key sound.
Enable/Disable Frequency Counter
The oscilloscope has a built-in counter to display frequency when a signal
from channel 1 or channel 2 is measurable.
To turn it ON or OFF, toggle the button in Utility Menu 1/4 to
change the Counter option. Frequency counter will be displayed in the
lower right corner, as illustrated below: