B&K Precision 2516 - Manual - Manual (Page 80)

80
Figure 40 - Create Directory Name
7.
You can set the name using the on screen virtual keypad. Use
and keys to move the cursor position of the
name to left and right respectively. To select a character to insert at
the cursor position, use the and arrow keys to
move the selection cursor to the character you want to select.
8.
Then, press
to select InputChar. You can also press
arrow key to do the same.
9.
To delete a character at the cursor position in the name, select
DeleteCharacter in the on screen keypad, then press ,
which will say Delete Char when DeleteCharacter is selected from
the virtual keypad.
10.
To save with the configured name, select Confirm from the menu by
pressing .
11.
The folder will be created. Now, to save the file, set Modify option
to Files.
12.
Then, press
to select New File. Follow the same steps 7-10
to create a file name. The new setup or waveform file will then be
created onto the external memory. This process may take 10-15
seconds. A progress bar will be displayed to show the instrument’s
save progress.