B&K Precision 2516 - Manual - Manual (Page 125)

125
5 Using the Recorder
There are three categories under the recorder function: Scope Trend Plot,
Scope Recorder, and Meter Trend Plot.
The following sections will describe each of these functions in detail.
To enter the Recorder menu, press the button.
Scope Trend Plot
Scope Trend Plot allows storing two types of measurement data from the
oscilloscope’s channel input signals and plotting it to a graph. The data can
be stored into external memory using a USB flash drive connected to the
USB host port.
NOTE:
The oscilloscope cannot be in SCAN mode when
using scope trend plot. Before selecting the scope
trend plot function, check that the oscilloscope is
not in SCAN mode which will be indicated at the
top left of the display.
Scan mode is automatically enabled for timebase
set between 100 ms to 50 s.
NOTE:
When in scope trend plot mode, only the function
keys and the mode keys ( , ,
)are active.