B&K Precision 2516 - Manual - Manual (Page 47)

47
Menu
Display
2sec, 5sec, 10sec,
20sec, Infinite
Set display time of menu on the screen.
Next Page Page 2/2 Return to the first page of DISPLAY menu.
To change the settings to any of the menu options, press their
corresponding function keys (
- ).
Persistence: The wavefrom persistence can be configured by changing the
Persist menu option of the Display menu page 1. Use the to
toggle between persistence timing.
Intensity and Brightness: The waveform intensity and the display grid
brightness can be adjusted by first pressing
for intensity or
for grid brightness in the Display menu page 1. Then, use the or
arrow keys to increase or decrease the intensity or brightness
percentage respectively.
YT format: YT is the default format that displays the waveform of voltage
vs. time.
XY format: XY is the format that display the waveform as channel 1 (X) vs.
channel 2 (Y). When this format is used, the horizontal scale and position
keys cannot be used.
Below is an example of using XY mode with two sine waves for channel 1
and 2 with 90 degree offset.
Figure 16 - XY Mode