Remote communication, 6 remote communication – B&K Precision 2516 - Manual User Manual
Page 142
142
6 Remote Communication
The 2510 series digital storage oscilloscope comes with application software
which provides most of the controls that emulate the front panel of the
instrument. The miniUSB device port on the side of the instrument, when
not used for probe compensation, can be used to connect to a computer
using a miniUSB to USB type A cable and allow remote communication via
the software.
The software is free and can be downloaded at
Remote communication is supported using the software only. Remote
commands are not available.
This manual is related to the following products: