B&K Precision 2516 - Manual - Manual (Page 44)

44
Run/Stop Mode
Press the button to toggle between continuous run mode and
stopped mode.
In continuous run mode, the signal going into channel 1 and/or 2 will
constantly be triggered regardless of the position of the trigger level. At the
top, the indicator will display “Trig’d” to indicate that the signal is triggered.
In stopped mode, the oscilloscope will stop triggering the signals going into
channel 1 and/or 2. At this point, users can zoom or pan to view the entire
waveform acquired from the last trigger.
3.4 Scope Menu
To access the scope menu, press the orange colored key. There are
five submenus: Acquire, Display, Math, Horizon, and Ref.
Acquire Menu
To access the acquire menu, go to the scope menu and press to
select Acquire. Below is a table of the Acquire menu structure.
Table 5 - Acquire Menu
Menu
Option
Setting Description