B&K Precision 2516 - Manual - Manual (Page 79)

79
To save setups and waveforms, follow the steps below:
1.
Press
to go into the Save/Recall menu, then select Type.
2.
Toggle
to choose Setups to save instrument setups, or
choose Waveforms to save waveform traces on display.
3.
To save the file into internal memory, press
to set Save To
to Device. To save the file to external memory, set it to File and go
to step 5.
4.
If Save To is set to Device, toggle
to choose the internal
memory location to save the file to. There are total of 20 storage
locations (No.1 – No.20).
5.
Now, press
to Save and the current instrument settings
will be stored into the configured memory location. If saving to
external memory, the directory explorer will display, as shown
below. Here, you can choose to create a new directory or new file
to save as your file.
Figure 39 - Directory Menu 1/2
6.
To create a new directory, toggle
to set Modify option to
Directory. Then, press to select New Dir. And the
following screen will display: