B&K Precision 2516 - Manual - Manual (Page 94)

94
End Frame Set end frame.
Return Press to exit back to the Utility menu.
Next Page Page 2/2 Return to the first page of the Playback menu.
3.9 Measurement and Cursor Functions
Measurement Functions
NOTE:
The measurement function will not make automatic
measurements when the instrument is in SCAN mode.
Time base must be ≤ 50 ms.
The instrument has many built-in automatic measurement functions
available, which are categorized by voltage measurements, time
measurements, and delay measurements.
To access the measurement function menu, press until the
Measure menu is displayed.
By default, the menu options will show five different measurements in the
menu display area. Each of these 5 measurements can be changed to show
different measurements by selecting its corresponding function key
( - ).
In the Measure menu, press any of the function keys to go to the
measurement selection menu, as shown below.