B&K Precision 2516 - Manual - Manual (Page 133)

133
By frame
When replaying, the screen waveform updates
the whole screen according to the time of
sampling every frame of data.
Return Return to the Scope Recorder menu.
Configure Record Options
Press from the Scope Recorder menu to select Options.
Press to set the Viewer for Full Screen or Split view. Then, set
Record to continuous or Single by pressing .
Start Scope Recording
To enable scope recording, press from the Scope Recorder menu
to select Record. Then, setup Save Mode to select where you want to store
the recording.
If USB key is selected for Save Mode, File Name will be shown in the menu
with a file name starting with BKXXXXX where XXXXX will be an auto
increment number starting with 00001. If no external USB flash drive is
detected, File Name will indicate No U disk.
Figure 72 - Scope Recorder External Save Mode