B&K Precision 2516 - Manual - Manual (Page 95)

95
Table 36 - Measurement Selection Menu
Menu Option Description
Voltage Press this button to enter the Voltage measure menu.
Time Press this button to enter the Time measure menu.
Delay Press this button to enter the Delay measure menu.
All Mea Press this button to enter the All Measurement menu.
Return Return to the Measure menu.
Select the measurement parameters, then configure the type of
measurement to display. When finished, press Return option to
go back to the Measure menu, and the corresponding menu option will
now display the selected Measurement Parameter.
Voltage Measurement Parameters
Table 37 - Voltage Measurement Parameters Menu
Menu
Option
Setting Description
Source CH1,CH2
Select input signal source for
voltage measurement.
Type
Vpp, Vmax, Vmin, Vamp, Vtop,
Vbase, Vavg, Mean, Vrms, Crms,
FOV, FPRE, ROV, RPRE
Select the type of voltage
measurement.
, , ,
, , ,
, , ,
,
Display the corresponding icon
for the selected voltage
measurement as well as the
measured value.
Return Return to the Measure menu.