Playback scope recording, Figure 73 - recording display – B&K Precision 2516 - Manual User Manual
Page 134
134
Press
to select Start. The instrument will start scope recording.
Figure 73 - Recording Display
The top left will indicate the record time, which tracks the time length of
the recording. The remaining time is also indicated to track how much
longer the instrument can record before memory is full.
To stop recording at any time, press
to select Stop.
To pause the recording at any time, press
to select Pause. While
the recording is paused, the
menu option will change to Continue.
Press it to continue recording.
Playback Scope Recording
To playback the recorded waveforms, from the Scope Recorder menu, press
to select Record. Then press
to select Replay. The
waveform will begin to replay on the display.
Alternatively, you can go to the Replay menu by pressing
from the
Scope Recorder menu, then press
again to select Restart to begin
playback.